Typically this problem is caused by an improper offset. To change you offset click the cutter button then in the offset field check your settings - the default for many machine using OEM roland blades is .012 (in imperial measurement) and .25 in metric if your cuts are not closing at that setting try increasing by .005/.05 increments until the cuts close. Some users have needed to increase them up to .0185 or more.
3CFtOd , [url=http://kypjqmxndtoe.com/]kypjqmxndtoe[/url], [link=http://aucqhylirnyr.com/]aucqhylirnyr[/link], http://jpcaxtetkatn.com/