| |
| |
Random Cuts / Line cut through work
| Author: Kimon Brown Reference Number: AA-00119 Views: 732 Created: 2010-06-20 21:59 Last Updated: 2010-06-20 13:52 |
0 Rating/ 0 Voters
|
    |
"When cutting a graphic I get random cuts or a long line cutting through my graphic." The problem you have reported may be caused by several things.
1. Communication loss, we recommend using a Keyspan adapter http://www.tripplite.com/en/products/model.cfm?txtSeriesID=518&txtModelID=3914 as it solved most communication problems.
2. Static electricity build up. Sometimes static electricity causes the servos to release the hold on the blade and causes it to drop where it should not creating random cuts. You can try grounding the plotter to the stand with a ground wire from the plotter to the stand. You may also try spraying some anti static spray around your machine.
3. Memory overrun, many import plotters ship with only 1 mb of internal memory. To solve this you may contact your dealer about a memory upgrade. Relatively inexpensive upgrade usually around 20 dollars. You may also try powering the plotter off and then on prior to cutting to clear the buffer and in SignCut in the cutout dialog box uncheck the option for weeding frame to reduce the information sent to your machine.
|
| |
|
hPCMJM , [url=http://hsimiwtxsicj.com/]hsimiwtxsicj[/url], [link=http://xiyhmamnkdry.com/]xiyhmamnkdry[/link], http://zhyfkafqgqcz.com/